2015年10月7日 星期三

ISS Daily Summary Report – 10/6/15

NanoRack Cubesat Deployer (NRCSD) #6 Operations:  Yesterday, two Danish cubesats and the first 4 Dove cubesats of the “Flock 2” fleet of satellites were launched.  This morning an additional 4 Dove cubesats were launched and the final 6 Dove cubesats will be launched tonight.  The Dove nanosatellites enable imagery of the entire planet to be taken on a frequent basis, with humanitarian and environmental applications ranging from monitoring deforestation and the ice caps to disaster relief and improving agriculture yields in developing nations.  A total of 16 cubesats will be deployed this week:  14 Planet Lab Doves and the 2 Danish satellites.   Sleep Log:  Kelly and Kornienko continued a week-long set of Sleep Log entries by making daily entries.  The Sleep ISS-12 experiment monitors ambient light exposure and crew member activity and collects subjective evaluations of sleep and alertness.  The investigation examines the effects of space flight and ambient light exposure on sleep during a year-long mission on the ISS.   Node 1, 2 and 3 Cable Routes:  As part of USOS Reconfiguration, Lindgren finished an activity he started yesterday to install power and data cables within Node 1.  Once complete, he re-installed all of the closeout panels he had removed in support of this activity.  Yui, routed power cables from the Node 2 DC-to-DC Converter Unit (DDCU) Rack to the Node 2 Aft Bulkhead.  The cables will eventually provide redundant power to Node 1 Nadir Berthing Port and Node 1 Galley Rack.  Kelly re-routed a Node 3 Sample Delivery System (SDS) power cable which will provide power to a new Node 1 Deck SDS Valve. This cable was previously routed, however laid short of the connection point.  The Node 3 cable routing called for a widespread powerdown of Node 3 systems, including the Node 3-1 MDM, OGA, MCA, and CDRA.  The Lab CDRA was activated for CO2 removal.   Remote Power Control Module (RPCM) N31B4A F1 Change Out:  Kelly replaced RPCM N31B4A F1 which is located behind Node 3 Avionics Rack #1.  The RPCM had experienced a switch anomaly in March 2015 which prevented power distribution to Audio Bus Coupler (ABC)-5, an Orbital Replacement Unit (ORU) that provides a redundant Audio path for voice and Caution/Warning Tones to and from Node 3 and Cupola Modules.   Russian Treadmill (БД-2) Repair:  Today, Kornienko and Kononenko have replaced a broken Thrust Compensator Bracket on the Russian Treadmill (БД-2).  The bracket was reported as broken last month.  With no onboard spares available, Russian Ground Teams manifested a replacement bracket onboard Progress 61P.  Mission Control Center (MCC)-M has given the Russian Crew a go for БД-2 exercise.  The Russian Crew had been using the US Treadmill 2 (T2) while БД-2 was out of service.   Robotics Refueling Mission (RRM):  Yesterday, the Robotics Ground Controllers maneuvered Special Purpose Dexterous Manipulator (SPDM) Arm2 into position to continue the Robotics Refueling Mission (RRM) payload Task Board 3 (TB3) Science Operations.  All objectives for TB3 were completed. This evening and overnight, ground controllers will begin TB4 science operations.   Today’s Planned Activities All activities were completed unless otherwise noted. Node 2 – Cable Installation/Routing Ops Geophysical Experiment ГФИ-1. Charging battery for Relaksatstiya experiment Node 2 – Cable Installation/Routing Ops – Hardware gathering for cable installation/routing On MCC GO Vozdukh Deactivation БД-2 Repair CARDIOVECTOR. Experiment Ops Node 2 – Cable Installation/Routing Ops – Cable Installation HOPA –  Operations COSMOCARD. Preparation Ops. Starting 24-hr ECG Recording CUPOLA Window Shutter Close Node 3 – Cable Installation/Routing Ops В3 Fan Screen Cleaning in MRM2 Node 1 – Cable Installation/Routing Ops NOD3 UOP1 & UOP44 Hardware Powerdown Node 2 – Cable Installation/Routing Ops Vacuum Cleaning В1, В2 air ducts in MRM2 RPCM R&R NOD3O4 N31B4A F1 Air Heater Fan [БВН] Screen Cleaning in ТК 718 Node 3 Cable Routing/Installation Power Up NOD2 CQ-1 (Crew Quarter 1) Equipment ISS SRVR1 – Loading backup Hard Drives Psychological Evaluation Program (WinSCAT) On MCC GO Vozdukh Atmosphere Purification System [СОА] Activation Filling (separation) of EDV (KOV) for Elektron or EDV-SV. MRM2 comm config to support the P/L Ops KULONOVSKIY KRISTALL. Hardware Setup and Configuration OBT – HTV Rendezvous and Docking Conference ISS EMU Swap ISS SRVR1 – Stowage of loaded b/u hard drives KULONOVSKIY KRISTALL. Experiment Ops Kulonovskiy Kristall Experiment Photography INTERACTION-2. Experiment Ops HAM radio session from Columbus MRM2 Comm Reconfig for Nominal Ops CONTENT. Experiment Ops NOD3 UOP1 & UOP 4 Hardware Powerup RELAKSATSIYA. Mounting hardware on CQ window No.1 Saving personal data from RSK2 Laptop prior to installation of a new SW version RELAKSATSIYA. Parameter Settings Node 1 – Cable Installation/Routing Ops PMM Hygiene Questionnaire RELAKSATSIYA. Observation Saving personal data from RSK2 Laptop prior to installation of a new SW version OGS – Mating QD connectors Evening Work Prep RELAKSATSIYA. Closeout Ops Preparation of reports for Roscosmos site ECON-M. Observations and Photography IMS Delta File Prep KULONOVSKIY KRISTALL. Copy and Transfer Data to Hard Drive   Completed Task List Items Safety Video Followup [In Work] 61P Unpack [In Work]   Ground Activities All activities were completed unless otherwise noted. JEMRMS Operations in support of CubeSat deploys System Safing in preparation for RPCM N31B4A F1 Change Out Robotics Refueling Mission Science Operations [In Work]   Three-Day Look Ahead: Wednesday, 10/07:  NRCSD #6 Deploys, RRM Ops, EMU Loop Scrubs, EMU resizing Thursday, 10/08:  SPHERES, Node 1 Nadir Power Connections Part 1, MELFI-2 RIU replacement Friday, 10/09:  SPHERES, Node 1 Nadir Power Connections Part 2   QUICK ISS Status – Environmental Control Group:                               Component Status Elektron On Vozdukh Manual [СКВ] 1 – SM Air Conditioner System (“SKV1”) Off [СКВ] 2 – SM Air Conditioner System (“SKV2”) Off Carbon Dioxide Removal Assembly (CDRA) Lab Operate Carbon Dioxide Removal Assembly (CDRA) Node 3 Standby Major Constituent Analyzer (MCA) Lab Shutdown Major Constituent Analyzer (MCA) Node 3 Shutdown Oxygen Generation Assembly (OGA) Stop Urine Processing Assembly (UPA) Shutdown Trace Contaminant Control System (TCCS) Lab Off Trace Contaminant Control System (TCCS) Node 3 Off    

October 07, 2015 at 12:44AM
from NASA http://ift.tt/1LhKgB8
via IFTTT

沒有留言:

張貼留言